#16100 HPH: Texas Superior Animal Waterer® with High Pressure Float Valve Assembly and Heater Pad (pre-mounted)
Item #16100 HPH includes:
The Texas Superior Animal Waterer®
with High Pressure Float Valve Assembly
(standard TM 185 Little Giant Float Valve is not included),
and 110-Volt, 100-Watt, Silicone Heater Pad (pre-mounted)
The High Pressure Float Valve Assembly is an optional feature for use with Texas Superior Animal Waterer®. It comes with a custom mounting bracket that can be attached to the Texas Superior Animal Waterer® without any other fastenings needed, replacing the standard float valve it typically comes with. Also included in the assembly, and pre-installed, are the brass fittings needed to attach the High Pressure Float Valve to our fitting kits or your water supply.
The High Pressure Float Valve included in this assembly is rated up to 145 PSI, over 4X higher than that of the standard float that the Texas Superior Animal Waterer® normally comes with. The standard float is recommended for use in water systems with a pressure no greater than 35 PSI.
Heating Pad Specs:
6” x 10”, 110-volt, 100-watt, silicone pad heater
This heater pad is equipped with 3M brand self-adhesive and is pre-mounted and sealed with silicone on the bottom of the waterer unit. It comes complete with a temperature control thermostat. The heater pad is designed to maintain a temperature of approximately 55° F. In a recent test with an ambient temperature of 15° F, the heating cycle was approximately 7 minutes. This heater is durable and long lasting.