#16105 HPFA: High Pressure Float Valve Assembly
Item #16105 HPFA includes the High Pressure Float Valve, the High Pressure Float Valve Mounting Bracket, as well as all the fittings necessary to attach the High Pressure Float to your water supply. The High Pressure Float Valve Assembly comes complete with everything needed to replace the standard float valve that is included with the Texas Superior Animal Waterer® unit. Item #16105 HPFA comes fully assembled and ready to use.
Item #16105 HPFA High Pressure Float Valve Assembly has a custom mounting bracket made to fit into the Texas Superior Animal Waterer® unit and hold the High Pressure Float Valve onto the existing tines of the waterer unit. With this assembly, you can easily replace the standard float valve that the unit typically includes with a High Pressure Float Valve.
To replace the standard TM 185 Little Giant Float Valve inside your Texas Superior Animal Waterer® unit, remove the brass thumb screw on the front of your waterer, and take off the float cover. Now, disconnect the existing float valve, and remove it from the waterer. Install the High Pressure Float Valve Assembly, sliding the forked feet of the mounting bracket down over the tines inside the waterer, and replace the float cover and thumb screw.
Please note, The High Pressure Float Valve comes with a small filter screen installed in the water inlet, inside the brass elbow fitting. If you notice a loss of pressure, or your waterer is slow to fill, it may be time to check, clean, or replace this filter screen. If problems persist, please don't hesitate to contact us directly for assistance.